Zebra Tutorials
Use Zebrify by U-he To Make Awesome Sounds
So far we have only looked at U-he Zebra, but have you also checked out Zebrify?
Zebrify comes with Zebra and its really an awesome addition to the great synthesizer. The main advantage of Zebrify is that you can use it on anything! You can try it on guitars, vocals, drums, whatever you wish! The first thing you need to do is set the input detection, the modulators and Zebrify need to be triggered on time so this is important.
The input settings depend a little bit on what kind of sound your using, if you use a drumloop its going to be easy, but if you use pads with slow attack settings you might have a more difficult time. What you can do in that case is to use a muted separate track with percussive sounds, or just a click, to tell Zebrify what the timing is.
You can find more about this in the Zebra manual, all the way at the bottom there is a section about Zebrify. For this sound I used just an Apple drumloop. I send the loop through 2 channels, one is for the filtered version thats is controlled with a MSEG and the other one is going through a delay and a comb filter.
I then modulate the delay to get some more rhythm going, and I modulate the pitch of the Comb filter for a simple melody. But there is so much more you can do, you can even use oscillators on top of the sound that is allready going through the input, really awesome stuff, go check it out!
– Jorgalad