$0.00 0

YOUR CART
Checkout

SUBTOTAL
DISCOUNT
VAT
TOTAL
Checkout
Banner
FM8 is a great synth for those tight tempo synced bass and lead sounds and some seriously cool...

FM8 Tutorials

Creating Sequenced Bass Sound in FM8

FM8 is a great synth for those tight tempo synced bass and lead sounds and some seriously cool grooves can be achieved. We will use tempo synced envelopes in combination with “silent” operators to achieve groovy bass sound but this technique can be used elsewhere and next time we will look how to create lead sounds using very similar technique.

Here is the midi sequence I am using trough out this tutorial.

Enable operator C.

Set it’s self oscillation value to 37 to add some harmonics.

Sync the envelope and set it to loop 1/8 of a bar.  Remember, if we want it to be looped we have to add another breakpoint between the two loop markers or else the envelope won’t loop (It needs at least two breakpoints to loop).

Now let’s go set the Unison page in the Master section.

Set both Polyphony and Unison voices to 2 for now.

Set detune to 55.

Also set the Mono button on. This forces FM8 not to retrigger the envelopes if the notes are overlapping. This way we can play different notes but keep envelopes looping without re-triggering them.

Now enable operator B.

Sync it’s envelope and set it like this. Also set velocity parameter to 30.

Set operator B to modulate operator C with amount of 40.

Now here is the trick. If we set operator C ratio to 0 it means operator C won’t be heard anymore because it’s frequency is zero. But because we are modulating it with operator B we will hear operator C only when it’s frequency is modulated and thus non-zero. And since we have rhythmic envelope in operator B this will result in a sort of a gating effect but not just that since the timbre is also being changed at the same time. This way you can create some cool sequences.

If you want more pronounced sound raise the self oscillation amount to 41.

Here you can hear the sound played in two different octaves, 8 bars each. I have also added simple drum sequence. No other effects are used in these samples except for some EQ and limiter on the master channel for some extra loudness.

[audio:https://www.fm8tutorials.com/wp-content/uploads/2012/06/Sample1.mp3|titles=Sample1]

Now we can take this even further. Enable operator D and sync it’s envelope and set it to something like in the picture below.

Now route operator D to operator C with amount of 38. So now there is also operator D “triggering” operator C.

Also try setting ratio of operator D to different higher (or lower) values so you can add more frequency content of your choice to the basic waveform of operator C.

We could also modulate operator B instead of operator C. This produces a bit different effect.

[audio:https://www.fm8tutorials.com/wp-content/uploads/2012/06/Sample2.mp3|titles=Sample2]

Now let’s set also operator B ratio to zero and use operator D to “excite” operator B. This will result in even more complex sequence and also in different, more aggressive sound.

I have also changed the slopes of envelope B to get more bass else it is being choked too much.

You can hear more dirt in the sound now.

[audio:https://www.fm8tutorials.com/wp-content/uploads/2012/06/Sample3.mp3|titles=Sample3]

We could also add operator A to also modulate operator B introducing even more dirt in to the sound.

Try changing self-oscillation amounts and modulation values to achieve different variations but most importantly play with operator B envelope to achieve different grooves.

Here is one extreme variation I particularly like (Changed the envelopes, ratios and modulation amounts, the sequence is the same). Only drum loop and one instance of FM8, no other sounds used.

[audio:https://www.fm8tutorials.com/wp-content/uploads/2012/06/Extreme-Sample1.mp3|titles=Extreme Sample]

Ratio values have great effect on the overall sound. Try to set operators A-D to something like this.

This strongly affects the sound (the midi sequence was not changed).

[audio:https://www.fm8tutorials.com/wp-content/uploads/2012/06/Sample7.mp3|titles=Sample Higher Ratios]

You can hear this results in a completely different sound but still with strong resemblance to the original sequence. So you could effectively use these variations as a different bass line parts in your song. Here are few variations of the same patch playing the same midi sequence to give you the idea. Beside EQ I have also added touch of delay to some patches. No other effects used.

[audio:https://www.fm8tutorials.com/wp-content/uploads/2012/06/Variations.mp3|titles=Variations]

This is it for this tutorial. In the next one we will look how to create and modulate lead sound using similar technique.

If you don’t understand something or have any other questions or comments feel free to leave them below.

Till next time!

Tonko

RELATED COURSES

Functional Sound Design - FM Synthesis

ADSR Courses

Add to cart

Advanced Sound Design Techniques

ADSR Courses

Add to cart

Dubstep Bass Design In FM8

ADSR Courses

Add to cart

FM8 Expert Panel Explained

ADSR Courses

Add to cart
Waveform Loaded
Waveform Played
×
PLAYLIST
Clear all
WISHLISTS
Create an account to use wishlists
×
SAVE TUTORIALS
Create an account to save tutorials
×
FOLLOW YOUR FAVORITES
Follow your favourite labels, formats and genre's and ADSR will show what's new in those on your next visit.
×
  • Create product wishlist
  • Save your favorite tutorials
  • Regular discounts and exclusives
  • Never miss a sound! Follow your favorite labels.
Sign up to My ADSR to ensure you're ahead of the pack. Save your favorite content and be notified of new content. You'll never miss a thing!
Create your account now!
CREATE ACCOUNT
Sign up to My ADSR to ensure you're ahead of the pack. Save your favorite content and be notified of new content. You'll never miss a thing!
  • Get days all ADSR courses free
  • Create product wishlist
  • Save your favorite tutorials
  • Regular discounts and exclusives
Create your account now!
SIGN IN
adsrsounds.com login Video streaming login
Remember me
Forgot your password?
DON'T HAVE AN ADSR ACCOUNT?
Create your account
FORGOT PASSWORD

Send info
  1. Enter your email address
  2. Click "Send info"
  3. Check your inbox for an activation link
  4. Visit activation link and enter set new password
Sign in
DON'T HAVE AN ADSR ACCOUNT?
Create your account
IMPORTANT: Is this product compatible with your system? Please check the product system requirements tab before purchasing. To proceed with this purchase you must check the box to confirm you have checked the requirements.


I have read the system requirements and agree to the return policy. I understand that refunds will not be given due to limitation of my software or operating system.

I don't agree
, you have loyalty credit available. To redeem click the button to claim !
Claim
Claim your free sounds

For every $5 you spend on ADSR receive 1 free credit for Sample Manager.

Even better, we have back-dated this so any purchases you made since 2017 have also been credited to your account!

Click the button below to claim your free credit.

Get my free credits
Loyalty credits
1Every purchase you make on ADSR* now earns you 1 loyalty credit for every $5 spent
2Once you make a purchase your credits are added to your account
3Credits can be redeemed in ADSR Sample Manager to download individual loops and samples
4To redeem simply download ADSR Sample Manager and/or log into Sample Manager with your ADSR login details
5Credits will have been automatically added to your account
6Loyalty credits expire 30 days after initial purchase
* Not including video subscriptions